Dr. Naseem Ahamad
Assistant Professor

Dr. Naseem Ahamad is a faculty of composite Material, Material engineering, Engineering Mechanics, Strength of Material, Theory of Machine and Machine Design at IILM, Greater Noida. He comes with an enriching experience of 12+ years and has been teaching at IILM, Greater Noida for over 9 years. Many students have completed their B. Tech Major Projects and M. Tech Dissertation under his guidance. He has published Research papers in SCI journals, Scopus Indexed Journals and various reputed national and international conferences.
He has been served as reviewer of various international Journals (Scopus Indexed). He has been a member of the technical reviewer committee of various conferences. He has delivered special sessions on International/National conferences, Faculty development program and academic internship programs.

Qualification

  • Ph.D., Mechanical Engineering, Jamia Millia Islamia, University New Delhi (2021)
    – Topic: Structural and Mechanical behavior of Aluminum 6351-Al2O3/C/SiC/TiO2 Hybrid Metal Matrix Composite
  • M. Tech, Jamia Millia Islamia, University New Delhi (2013)
    – Major: Machine Design (I-DIV HONS)
  • B. Tech, UPTU Lucknow (2009)
    – Major: Mechanical Engineering (I-DIV HONS)
  • AUTO CADD, PRO-E, NPTEL, Coursera

Dr-Naseem-Ahmad

SCI Journals

  • Naseem Ahamad, Aas Mohammad, Kishor Kumar Sadasivuni, Pallav Gupta” Structural and Mechanical Characterization of Stir Cast Al-Al2O3-TiO2 Hybrid Metal Matrix Composites” Journal of Composite Materials 2020, Vol. 54(21), 2985–2997. [Impact Factor: 2.591]
    https://doi.org/10.1177/0021998320906207
  • Naseem Ahamad, Aas Mohammad, Kishor Kumar Sadasivuni, Pallav Gupta” Phase, Microstructure and Tensile Strength of Al-Al2O3-C Hybrid Metal Matrix Composites” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, Vol. 234(13), 2681-2693. [Impact Factor: 1.762]
    https://doi.org/10.1177/0954406220909846
  • Naseem Ahamad, Aas Mohammad, Kishor Kumar Sadasivuni, Pallav Gupta” Wear, Optimization and Surface Analysis of Al-Al2O3-TiO2 Hybrid Metal Matrix Composites” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, Vol. 235(1) 93-102. [Impact Factor: 1.674]
    https://doi.org/10.1177/1350650120970432
  • Naseem Ahamad, Aas Mohammad, Moti Lal Rinawa, Kishor Kumar Sadasivuni, Pallav Gupta ” Correlation of Structural and Mechanical Properties for Al-Al2O3-SiC Hybrid Metal Matrix Composites” Journal of Composite Materials 2021 [Impact Factor: 2.591]
    DOI: 10.1177/00219983211011537
  • Pallav Gupta, Naseem Ahamad, Jimmy Mehta, Devendra Kumar, M. A. Quraishi, Moti Lal Rinawa, Sumit Gupta, Vijay Chaudhary and Kishor Kumar Sadasivuni” Corrosion, Optimization and Surface Analysis of Fe-Al2O3 -CeO2 Metal Matrix Nanocomposites” Part C: Journal of Mechanical Engineering Science, 2021, [Impact Factor: 1.762]
    https://doi.org/10.1177/09544062211047844

Scopus Indexed Conferences (Presentation and Proceedings)

  • Naseem Ahamad, Aas Mohammad, Pallav Gupta. (2020).” Wear Characteristics of Al Matrix reinforced Al2O3-Carbon Hybrid Metal Matrix Composites” International Conference on Future Learning Aspects of Mechanical Engineering (FLAME-2020), 5th – 7th August 2020, Amity University Uttar Pradesh, Noida India, Materials Today: Proceedings – Elsevier, https://doi.org/10.1016/j.matpr.2020.05.739
  • Moti Lal Rinawa, Kartar Singh, Vijay Chaudhary, Naseem Ahamad, Partha Pratim Das, Sumit Gupta and Pallav Gupta (2021). “Optimization of tribological performance of plant fibers based polymer composites” 3rd International Conference (ICCAME-2021) 27th -28th August Chandigarh Group of Colleges, 2021 Materials Today: Proceedings – Elsevier, https://doi.org/10.1016/j.matpr.2021.09.163
  • Kartar Singh, Moti Lal Rinawa, Naseem Ahamad, Vijay Chaudhary, Partha Pratim Das, Sumit Gupta and Pallav Gupta (2021). “Optimization of Tribological Performance of Natural Fibers/Epoxy Composites using ANOVA & TOPSIS Approach” 3rd International Conference (ICCAME-2021) 27th – 28th August Chandigarh Group of Colleges, 2021 Materials Today: Proceedings – Elsevier, https://doi.org/10.1016/j.matpr.2021.09.112
  • Moti Lal Rinawa, Kartar Singh, Vijay Chaudhary, Naseem Ahamad, Partha Pratim Das, Sumit Gupta and Pallav Gupta (2021). “Simulation of Bio-Fiber Based Polymer Composites for Frictional and Specific Wear Rate” 3rd International Conference (ICCAME-2021) 27th -28th August Chandigarh Group of Colleges, 2021 Materials Today: Proceedings – Elsevier, https://doi.org/10.1016/j.matpr.2021.09.184
  • Naseem Ahamad, Aas Mohammad, Pallav Gupta. (2020). “Microstructural Evaluation of Al Matrix Reinforced Al2O3-C/SiC/TiO2 Hybrid Metal Matrix Composite” International Conference on Industrial and Manufacturing Systems (CIMS-2020), 9th – 11th October 2020, N.I.T.- Jalandhar, Punjab – INDIA. The edited book “Advancements in Manufacturing Systems and its Optimization, AAP-CRC Press (Taylor & Francis). (Accepted)

Scopus Indexed Conferences (Proceedings)

  • Uma Sharma, Naseem Ahamad, Shahazad Ali, Satish Kumar, Pallav Gupta (2022). “Performing a comparative study of mechanical properties of Al-Cu composite reinforced with or without bimetallic SiC micro-particle” 3rd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (E-Conference), November 19-20, 2021 – NMAM Institute of Technology, Nitte, Karnataka, India Materials Today: Proceedings – Elsevier https://doi.org/10.1016/j.matpr.2021.11.382
  • Satish Kumar, Naseem Ahamad, Shahazad Ali, Uma Sharma, Pallav Gupta (2022). “Investigation of the influence of bimetallic micro SiC particles reinforced in FSW of Al6061-Al7075 composite” 3rd International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (E-Conference), November 19-20, 2021 – NMAM Institute of Technology, Nitte, Karnataka, India Materials Today: Proceedings – Elsevier
    https://doi.org/10.1016/j.matpr.2021.12.433
  • Shahazad Ali, Anant Prakash Agrawal, Naseem Ahamad, Tribhuwan Singh, Atif Wahid (2022). “Robotic MIG welding process parameter optimization of steel EN24T” International conference on Advances in Materials and Mechanical Engineering (ICAMME-2022) 18-19 Feb’ 2022 at Ajay Kumar Garg Engineering College, Ghaziabad, Uttar Pradesh, India. Materials Today: Proceedings – Elsevier
    https://doi.org/10.1016/j.matpr.2022.03.091

Book Chapter (Scopus Indexed)

Naseem Ahamad, Aas Mohammad, Moti Lal Rinawa (2021). “Characterization and Applications of Fe/Cu/Mg/Al Based Metal Matrix Composites” Metal Matrix Composites/466023, [Vol. 2: 466061 (Properties and Applications)], CRC press, Taylor & Francis Group (Accepted).

International Conference (Oral Presentation)

  • Naseem Ahamad, Aas Mohammad, Pallav Gupta. (2020). “Dual Ceramic Reinforced Aluminium Matrix composite: An Era of Hybrid Material” International Conference on Future Engineering (ICFE-2020), 26-27 June 2020, Dr. Rammnohar Lohia Avadh University, Ayodhya, U. P. – INDIA.
  • Vikash Kumar, Naseem Ahamad, Gaurav Kumar Sharma (2019)” Fabrication and Compressive Strength Analysis of Carbon Fiber Reinforced Nylon” STM Journal 2019, https://doi.org/10.37591/toeoc.v9i3.3605
  • Ashish Kumar Sinha, Dr. Siddhartha Sarkar, Naseem Ahamad, Manu Raj, Gaurav Kumar Sharma “Review of failure analysis of high pressure composite vessel” published in the proceedings of International Conference (CETCCME-2015), May-June -2015
  • Ajay Kumar, Akhileshwar Nirala, Naseem Ahamad (2014)”Wear behaviour of Friction Stir Welding by different parameter”, Proceedings of International conference on Technological and Management Advances in the New Age Economy: An Industry Perspective March, 01, 2014 at Mangalmay Institute of Management & Technology, Greater Noida.