Patent published in 2021, Topic of patent – Robot assisted battery interchanging system for electric vehicles.
Link: https://ipindiaservices.gov.in/PatentSearch/PatentSearch/ViewApplicationStatus
APPLICATION NUMBER: 202111013882

• Shatrughan Singh and Bhim Singh (2019) ‘Temperature dependent dynamic hysteresis scaling of ferroelectric hysteresis parameters of lead free[(Ba0.825+xCa0.175-x)(Ti1-xSnx)O3]Ceramics’, Ferroelectrics, 551(1), 133-142. (SCI Indexed)
• Shatrughan Singh, K. S. Srikanth and Bhim Singh (2019) ‘Investigation on energy storage density and thermal energy harvesting capabilities in ferroelectric [(1-x)Ba0.9Ca0.1TiO3 -x(BaSn0.2Ti0.8O3)] ceramics’, Integrated Ferroelectrics, 192:1, 28-37.(SCI Indexed)
• Shatrughan Singh, K. S. Srikanth and Bhim Singh (2019) ‘Structural and dielectric properties of BaCexTi1-xO3 ceramics’, Integrated Ferroelectrics, 192:1, 121-129. (SCI Indexed)
• Ashish Dewangan, Ashok Kumar Yadav, Ashis Mallick, Amit Pal & Shatrughan Singh (2019) ‘Comparative study of Manilkara zapota and Karanja based biodiesel properties and its effect on diesel engine characteristics’, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp.1-11, DOI: 10.1080/15567036.2019.1661551. (SCI Indexed)
• Moolchand Sharma, VP Singh, Shatrughan Singh, Puneet Azad, Bouraoui Ilahi, Niyaz Ahmad Madhar (2018) ‘Enhanced pyroelectric figure of merits of porous Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics’, Journal of Electronic Materials,47,8, 4882-4891. (SCI Indexed)
• Shatrughan Singh, K. S. Srikanth and Bhim Singh (2018) ‘Pyroelectric performance of [(1-x)Ba0.9Ca0.1TiO3-x(BaSn0.2Ti0.8O3)] lead-free ceramics’, Ferroelectrics, 526:1,68-75.(SCI Indexed)
• Moolchand Sharma, Shatrughan Singh and Bhim Singh (2018) ‘Pyroelectric performance of (Ba0.825+xCa0.175-x)(Ti1-xSnx)O3 lead-free ceramics’, Ferroelectrics Letters Section, Accepted.(SCI Indexed)
• Shatrughan Singh, K. S. Srikanth & Bhim Singh (2017) ‘Temperature dependent dynamic hysteresis scaling of ferroelectric hysteresis parameters of [(1-x)Ba0.9Ca0.1TiO3-x(BaSn0.2Ti0.8O3)] ceramics’, Ferroelectrics Letters Section, 44:4-6, 101-112.(SCI Indexed)
• Shatrughan Singh and Bhim Singh, (2017) “Study on Waste Heat Energy Harvesting using Pyroelectric Ceramics”, International Journal of Advance research in science and engineering, Vol. no.-06, Special issue no.-02, page no.-284-290, ISSN No.-2319-8354.
• Shatrughan Singh, Dr. Debojyoti Mitra & Vishnu Prakash, (2016) “A review Paper on Wind Climate Modeling”, ELK Asia Pacific Journals – Special Issue, ISBN: 978-81-930411-8-5.
• Ashok Kumar Yadav, Shatrughan Singh, Gaurav Gupta & Uttam Ghosh ,(2014) “Generation of Electricity Through Staircase”, International Journal of Advanced Science Letters, ISSN:1936-6612, Volume 20, 7-9 July, pp. 1303-1306(4).Impact Factor: 1.253.
• Ashok KumarYadav, Shatrughan Singh, Gaurav Gupta & Uttam Ghosh,(2014) “Design and Manufacturing of Honing Tool for Drilling Machine”, International Journal of Advance Research and Innovation (ISSN 2347 – 3258),Volume 2, Issue 2, 433-435.
• Ashok Kumar Yadav, Shatrughan Singh & Gaurav Gupta,(2014) “Solar Air-Conditioning: Design for a compressor-less system using Peltier effect”, International Journal of Advance Research and Innovation (ISSN 2347 – 3258),Volume 2, Issue 2, 429-432.
• Shatrughan Singh, A. K. Yadav, Gaurav Gupta,(2013) “Design and Fabrication of a Prototype of Hovercraft” International Journal of Engineering Research and Technology, ISSN 0974-3154 , Volume-6, No. 9, pp. 1-5.

• Shatrughan Singh, Ashok Kumar Yadav and Bhim Singh, (2018) ‘Study of energy storage density and thermal energy harvesting capabilities in BaTiO3 based ferroelectric ceramics’, International conference of Advance Research and Innovation (ICARI-2018) held at Institutions of Engineers Delhi state center, New Delhi on 28th Jan, 2018.
• Shatrughan Singh and Bhim Singh, (2017) ‘Study on Waste Heat Energy Harvesting using Pyroelectric Ceramics’, Proceedings of International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2017) at G. L. Bajaj Institute of Technology & Management, Greater Noida on 8th – 9th December,2017, ISBN : 978-93-86171-85-6, pp :284-290.
• Ankit Kumar, Sudhanshu Singh, Shatrughan Singh, Ashok Kumar Yadav,(2018), “Dynamic hysteresis scaling of ferroelectric hysteresis parameters of Ceramics”, Proceedings of International conference on Advances in Refrigeration and energy systems -2018 (ICARES-2018) in Mechanical Engineering on 7-8 April, 2018 at Poornima college of engineering, Jaipur.
• Abhishek Kumar, Dr. Siddhartha Sarkar, D.N.Srivastava, Ankita Awasthi and Shatrughan Singh,(2015) “A review on Development of high pressure composite CNG cylinders”, Proceedings of International conference & Exhibition on cutting edge technological challenges in Mechanical Engineering at NIET, Greater Noida.
• Suresh Chandra Pal, SA Channiwala, Ashok Kumar Yadav, Shatrughan Singh, Gaurav Gupta,(2015) “No Load and Load Test of Black Nickel Coated Solar Cooker Without using reflector in Surat, India and Validating against Indian standards”, International Conference of Advance Research and Innovation (ICARI-2015), ISBN 978-93-5156-328-0.
• G.K. Sharma, S. S. Pundir & Shatrughan Singh , (2014) “Study of Multiferroic Properties of (1-X)BFO-XBT solid solution”,Proceedings of International conference on Technological and Management Advances in the New Age Economy : An Industry Perspective at Mangalmay Institute of Management & Technology, Greater Noida ,ISBN No.978-93-5156-339-6.PP-79
• Shatrughan Singh, A K Yadav, Gaurav Gupta, (2013) “Experimental investigation of mixing at branch angles of pipe for water-water and water with salt solution” Proceedings of International conference on Manufacturing Excellence (MANFEX 2013), Amity University Noida, India.
• A. K. Yadav, Shatrughan Singh, Gaurav Gupta, “A Review on Potential of Biodiesel as Alternate Fuel for IC Engines” (2013) Proceedings of International conference on Manufacturing Excellence (MANFEX 2013), Amity University Noida, India.
• A. K. Yadav, Shatrughan Singh, Vikas Maan, Mandeep Malik & Uttam Ghosh, (2013) “Experimental investigation of the effect of welding parameters on mechanical properties of heat affected zone of welded joints with metal inert gas (MIG) welding”,Proceedings of International conference on Smart Technologies for Mechanical Engineering(STME-2013) at DTU,New Delhi ,ISBN No : 978-93-83083-35-0,PP 629-636.
• Shatrughan Singh, A. K. Yadav, Gaurav Gupta & Raja Ram , (2013) “Design and modelling of Unmanned Ground Vehicle”,Proceedings of International conference on Smart Technologies for Mechanical Engineering(STME-2013) at DTU, New Delhi ,ISBN No.978-93-83083-35-0,PP 1199-1203.

• Ankit Kumar, Moolchand Sharma, Shatrughan Singh and Ashok Kumar Yadav, (2018) “Optimization Of Voltage Profile By Using PZT Pyroelectric Buzzer Materials”, Proceedings of National conference on Emerging Trends in Electronics, IT & Communication (ELECTROCON-2018) at IILM College of Engineering and Technology, Greater Noida, held on 15th March,2018. Page no: 73-76.
• Utsav Patel, Shashank Tripathi, Ashok Kumar Yadav and Shatrughan Singh, (2018) “Role Of Renewable Energy Sources In Sustainable Development”, Proceedings of National conference on Emerging Trends in Electronics, IT & Communication (ELECTROCON-2018) at IILM College of Engineering and Technology, Greater Noida, held on 15th March,2018. Page no: 69-72.
• Rohit Kumar Sharma, Vijay Kumar Yadav, Ashok Kumar Yadav and Shatrughan Singh, (2018) “Environmental Effects of Renewable Energy Sources”, Proceedings of National conference on Emerging Trends in Electronics, IT & Communication (ELECTROCON-2018) at IILM College of Engineering and Technology, Greater Noida, held on 15th March,2018. Page no: 51-54.
• Moolchand Sharma, Shatrughan Singh and Ashok Kumar Yadav, (2018) “Enhancement in pyroelectric energy harvesting using candle soot coating”, Proceedings of National conference on Emerging Trends in Electronics, IT & Communication (ELECTROCON-2018) at IILM College of Engineering and Technology, Greater Noida, held on 15th March,2018. Page no: 46-50.
• Shatrughan Singh and Bhim Singh, (2017) “Environmental friendly BaTiO3 based Ferroelectric Ceramics”, Proceedings of National conference on Emerging Trends in Mechanical Engineering and Technology (ETME- 2017) at SET, Sharda University, Greater Noida, ISBN : 978-93-86256-64-5,pp :78-81.
• Amit Kumar, Raju Kumar, Vivek Kumar & Shatrughan Singh, (2016) “Design & Fabrication of a Robotic Arm”, Proceedings of National conference on Innovative concepts in Mechanical Engineering at AKG Engineering College, Ghaziabad. ISSN: 0975 9514.
• Vishnu Prakash, Dr. Debojyoti Mitra, Gaurav kumar Gugliani & Shatrughan Singh, (2016) “Statistical study of energy pattern factor of Wind speed analysis”, Proceedings of National conference on Innovative concepts in Mechanical Engineering at AKG Engineering College, Ghaziabad. ISSN: 0975 9514.
• Ashok Kumar Yadav, Shatrughan Singh, Gaurav Gupta & Uttam Ghosh , (2014) “Incorporating Green Technology in Lighting and HVAC System of a Commercial Building for LEED Points and Carbon Credit”, Proceedings of National conference on Nano technology and Renewable energy at JMI Delhi.
• A. K. Yadav, Shatrughan Singh, Gaurav Gupta , (2013) “Design and Build a Miniature Prototype of Thermoelectric Cooling System for a Conventional Refrigerator” Proceedings of National Conference on Advancements in Mechanical Engineering-2013, NCAME-2013, at Alflah University Faridabad, Haryana.
• Shatrughan Singh, Sanjeev Kumar,Triloki Nath, (2006) “Optimum conditions for jet Mixing in Turbulent pipe flow at branch angles for one phase flow” Proceedings of National Conference on Trends and Advances in Mechanical Engg.(TAME-2006) at YMCA Institute of Engg., Faridabad, Haryana